WD Music – Plastic Humbucker Pickup Mounting Ring

Sale!
  • HMR_A_xl
  • HMR_C
  • HMR_D
  • Plastic Humbucker Pickup Mounting Ring - Flat - Black Set Of 2 - 1 High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Black - High
  • Plastic Humbucker Pickup Mounting Ring - Arched - Black - High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Black - Low
  • Plastic Humbucker Pickup Mounting Ring - Arched - Black - Low
  • Plastic Humbucker Pickup Mounting Ring - Flat - Black - Medium
  • Plastic Humbucker Pickup Mounting Ring - Flat - Cream Set Of 2 - 1 High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Cream - High
  • Plastic Humbucker Pickup Mounting Ring - Arched - Cream - High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Cream - Low
  • Plastic Humbucker Pickup Mounting Ring - Arched - Cream - Low
  • Plastic Humbucker Pickup Mounting Ring - Flat - Cream - Medium
  • Plastic Humbucker Pickup Mounting Ring - Flat - Chrome Set Of 2 - 1 High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Chrome - High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Chrome - Low
  • Plastic Humbucker Pickup Mounting Ring - Flat - Chrome - Medium
  • Plastic Humbucker Pickup Mounting Ring - Flat - Gold Set Of 2 - 1 High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Gold - High
  • Plastic Humbucker Pickup Mounting Ring - Flat - Gold - Low
  • Plastic Humbucker Pickup Mounting Ring - Flat - Gold - Medium
  • Plastic Humbucker Pickup Mounting Ring - Flat - White - High
  • Plastic Humbucker Pickup Mounting Ring - Flat - White - Low

WD Music – Plastic Humbucker Pickup Mounting Ring

$4.26$24.70

These mounting rings are made for either flat top or arched top guitars in the most commonly used colours.

Flat Set:

This is a typical set of plastic mounting rings found on most 2 humbucker guitars. It is comprised of 1 high and 1 low ring.

High Flat:

This tall plastic humbucker mounting ring is generally used in the bridge position on a two or three pickup guitar. This mounting ring is angled in height so the side closest to the bridge is taller than the side closest to the neck or fretboard.

High Arched:

This is a tall plastic humbucker ring with an arched radius, designed for usage in the bridge position arched or carved top guitars. This mounting ring is not an exact Gibson® spec replacement ring. It has slightly larger exterior dimensions with an overall (top and bottom) arched design and slightly different mounting hole locations.

Low Flat:

This is the shortest plastic humbucker mounting ring we stock and is generally used in the neck position. This is angled in height so the side closest to the bridge is taller than the side closest to the neck or fretboard.

Low Arched:

This is a short plastic humbucker ring with an arched radius, designed for usage in the neck position arched or carved top guitars. This mounting ring is not an exact Gibson® spec replacement ring. It has slightly larger exterior dimensions with an overall (top and bottom) arched design and slightly different mounting hole locations.

Medium Flat:

This medium plastic humbucker mounting ring is generally used in the middle position on a three pickup guitar. Also can be used in neck or bridge position depending on the height requirements of your instrument. This is angled in height so the side closest to the bridge is taller than the side closest to the neck or fretboard.

Clear

Additional information

SELECT OPTION

, , , , , , , , , , , , , , , , , , , , ,

Specifications

[SKU:HMR]

High Flat Dimensions:
  • Pickup cutout width = 1.5 inches (38.2mm)
  • Pickup cutout length = 2.76 inches (70.2mm)Exterior Dimensions:
  • Exterior width = 1.76 inches (44.7mm)
  • Exterior length = 3.50 inches (89.1mm)
  • Exterior heights tall side = .375 inches (9.5mm)
  • Exterior height short side = .295 inches (7.5mm)
  • Height holes center to center = 3.07 inches (78mm)
  • Mounting holes center to center length = 3.185 inches (8.09mm)
  • Mounting holes center to center width = 1.43 inches (36.3mm)
High Arched: Dimensions:
  • Height on side facing the bridge = 11/32 in. (8.84mm)
  • Height on the side facing the neck = 5/16in. (7.92mm)
  • Radius of arch = 16 in.
  • Pickup Mounting Screw Ctr to Ctr = 3 5/64 in. (78.25mm)
  • Ring Mtg Screw Loc. = 3 5/16 in. (84mm)L X 1 29/64 in. (36.89mm)W
  • Interior Cutout size = 2 49/64 in. (70.16mm) L X 1 17/32 in. (38.8mm) W
  • Exterior Ring Dimensions = 3 39/64 in. (91.9mm) L X 1 51/64 in. (45.87mm)
Low Flat Dimensions:
  • Pickup cutout width = 1.5 inches (38.5mm)
  • Pickup cutout length = 2.75 inches (70.3mm)Exterior Dimensions:
  • Exterior width = 1.765 inches (44.8mm)
  • Exterior length = 3.5 inches (88.8mm)
  • Exterior heights tall side = .212 inches (5.4mm)
  • Exterior height short side = .141 inches (3.58mm)
  • Height holes center to center = 3.075 inches (78.1mm)
  • Mounting holes center to center length = 3.2 inches (81.3mm)
  • Mounting holes center to center width = 1.45 inches (36.8mm)
Low Arched: Dimensions:
  • Height on side facing the bridge = 13/64 in. (5.31mm)
  • Height on the side facing the neck = 3/32 in. (2.52mm)
  • Radius of arch = 16 in.
  • Pickup Mounting Screw Ctr to Ctr = 3 5/64 in. (78.25mm)
  • Ring Mtg Screw Loc. = 3 5/16 in. (84mm)L X 1 29/64 in. (36.89mm)W
  • Interior Cutout size = 2 49/64 in. (70.16mm) L X 1 17/32 in. (38.8mm) W
  • Exterior Ring Dimensions = 3 39/64 in. (91.9mm) L X 1 51/64 in. (45.87mm) W
Medium Flat Dimensions:
  • Pickup cutout width = 1.5 inches (38.2mm)
  • Pickup cutout length = 2.78 inches (70.8mm)Exterior Dimensions:
  • Exterior width = 1.76 inches (44.7mm)
  • Exterior length = 3.53 inches (89.65mm)
  • Exterior heights tall side = .29 inches (7.37mm)
  • Exterior height short side = .21 inches (5.36mm)
  • Height holes center to center = 3.09 inches (78.5mm)
  • Mounting holes center to center length = 3.18 inches (8.08mm)
  • Mounting holes center to center width = 1.42 inches (36mm)
Open chat
1
Need help?
Welcome to KDG, If you need any help open this and chat with us.